case4 Element |
Main element with specific settings for the determination of landing distances.
Namespace: Empty
Schema: Empty
Name | Occurrences | Description |
---|---|---|
Sequence | ||
vIASLD | Indicated air speed for aircraft landing. [m/s] | |
rwyCond | Runway condition: 0 = Dry 1 = Wet 2 = Flooded 3 = Icy This option is currently not supported by the 6-DOF model. | |
useReverser | Flag for using thrust reverser: 1 = Thrust reverser ON 0 = Thrust reverser OFF | |
useSpoiler | Flag for using ground spoiler: 1 = Ground spoiler ON 0 = Ground spoiler OFF | |
approachLength | Length of the approach flight path over ground. [m] | |
flareHeight | Height above ground at aircraft landing flare. [m] | |
fpaTouchdown | Reference flight path angle at touchdown point. [deg] | |
fpaStartApp | Reference flight path angle at the begin-ning of the approach. [deg] | |
rCgMldg | Distance from aircraft CG to the main landing gear axis. [m] | |
speedReverserOff | Thrust reverser is turned off if the indicat-ed air speed is equal or lower than the value defined by this element [m/s] | |
maxReverser | Maximum reverse thrust efficiency: 0 = 0percent Reverse thrust 1 = 100percent Reverse thrust | |
maxBrake | Maximum brake efficiency: 1 = 100percent brake efficiency 0 = 0percent brake efficiency | |
ctrl | Main element containing the setting for the PID controllers imitating the pilot in-puts during the landing approach. |
Name | Type | Required | Description |
---|---|---|---|
externalDataDirectory | string | ||
externalDataNodePath | string | ||
externalFileName | string |