| case1 Element |
Main element with specific settings for the determination of rotation speed VR, liftoff speed VLOF and safety speed V2.
Namespace: Empty
Schema: Empty
Type
ParentsChildren| Name | Occurrences | Description |
|---|---|---|
 Sequence | ||
 doStabTrim | Flag for stabilizer trim calculations before the take-off simulation runs. If turned off the stabilizer (or elevator) is not trimmed for positive climb at V2 and remains zero during the take-off run. 1 = Trim calculation ON 0 = Trim calculation OFF | |
| estimatedV2 | Estimated V2 velocities for the stabilizer trim calculation. [m/s] | |
| thetaV2 | Pitch angle required at safety speed V2 for stabilizer trim calculation. [deg] | |
| vIASRotInit | Vector with different speeds VIAS in increas-ing order determining the speed for elevator deflection during the take-off run. The vec-tor defines the range of elevator deflection speeds and number of take-off simulations. [m/s] | |
| ctrl | Main element containing the setting for the PID controllers imitating the pilot inputs during the take-off run. |
Attributes| Name | Type | Required | Description |
|---|---|---|---|
 externalDataDirectory |  string | ||
| externalDataNodePath | string | ||
| externalFileName | string |
See Also