| outerBorder Element |
Inner/outer border of the control surface.
Namespace: Empty
Schema: Empty
Type
ParentsChildren| Name | Occurrences | Description |
|---|---|---|
 Sequence | ||
 etaLE | Relative spanwise inner/outer position of the leading edge of the control surface. Reference is eta/xsi from the parent. | |
| etaTE | [0, 1] | Relative spanwise inner/outer position of the trailing edge of the control surface. Reference is eta/xsi from the parent. Defaults to 'etaLE'. |
| xsiLE | Relative chordwise inner/outer position of the leading edge of the control surface. Reference is eta/xsi from the parent. | |
| xsiTE | Relative chordwise inner/outer position of the trailing edge of the control surface. Reference is eta/xsi from the parent. | |
 Choice | ||
| airfoil | [0, 1] | Airfoil definition of an control surface at the inner/outer border. |
| leadingEdgeShape | [0, 1] | Optional definition of the leading edge shape of trailing edge devices (TED). |
| relHeightLE | [0, 1] | Defines the relative high of lowest point of the spoiler leading edge, relative to the airfoil hight of the parent at this position. See picture below. |
Attributes| Name | Type | Required | Description |
|---|---|---|---|
 externalDataDirectory |  string | ||
| externalDataNodePath | string | ||
| externalFileName | string |
RemarksDefinition of the inner/outer border of the control surface.
The position on the planform of the control surface is defined by defining the eta/xsi coordinates of the inner/outer and forward/rear border. The eta/xsi coordinates refer to the parent.
In addition, optionally, the airfoil shape of the control surface can be defined closer. For the spoiler'relHeightLE' is used. If an exact control surface airfoil definition should be used, outerShape->airfoils can be used.
Please find below an example for the definition of the planform of a trailing edge device. Other controlsurfaces are similar.
See Also